Wuhan Dimed Laser Technology Co., Ltd
Dimedlaser - Proffessional Manufacture Of Medical Lasers
|Place of Origin:||China|
|Brand Name:||Dimed laser|
|Model Number:||Berylas 15watts 940nm|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Aluminum wheel case with carton box|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||Aluminum wheel case with carton box|
|Application:||Laser For Removal Red Veins On Legs / Face||Laser Type:||GaAlAs Diode Laser|
|Model:||15watts 940nm||Operation Mode:||CW, Single Or Repeat Pulse|
laser treatment for spider veins,
pigmentation removal machine
Non Invasive 940nm Diode Laser For Removal Red Veins On Legs / Face
Telangiectasias, commonly known as Spider veins, are usually tiny dilated blood vessels beneath the skin surface and calibrating between 0.5 & 1 millimeter in their dimension. They might take place wherever on the body, nevertheless are normally observed around the nasal area, cheeks & chin. They may also appear on the lower limbs exclusively on the top of the legs, usually just below the knee joint in addition to throughout the ankles.Problems can occur when the valves inside the blood vessels behave faulty.
Dimed diode laser system is based on the thermal action of the laser. The transcutaneous irradiation (with a penetration of 1 to 2 mm in the tissue) causes tissue selective absorption by hemoglobin (hemoglobin is the main target of the laser).940nm/532nm laser is the optimum absorption spectrum of Porphyrin vascular cells. Vascular cells absorb the high-energy laser of 940nm /532nm wavelength, solidification occurs, and finally dissipated.
Laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal thickness and density, so that the small blood vessels are no longer exposed, at the same time, the skin’s elasticity and resistance is also significantly enhanced
High absorption 532 nm treatments are preferred for smaller and more superficial vessels. Superficial and small-diameter vessels are most selectively treated with wavelengths that are strongly absorbed by oxyhemoglobin as the vessels can be heated to clinical response temperatures with minimal incident energy. However, high oxyhemoglobin absorption can limit the depth to which laser light penetrates into skin, making it difficult to treat large or deep vessels with these wavelengths.
Moderate absorption 940 nm treatments are preferred for larger and deeper vessels. Less strongly absorbed wavelengths penetrate more deeply, and can more uniformly heat through larger diameter vessels. Higher fluences are used to overcome the lower absorption coefficient and successful treatments can be achieved with good selectivity. Of the near infrared wavelengths, 940 nm is optimal since it has the highest oxyhemoglobin absorption coefficient for improved selectivity, reduced discomfort, and fewer side effects.
1. Complete: pulsed laser can penetrate deep into the skin vascular tissue, stimulate the laser beam is absorbed by hemoglobin, let hemoglobin solidify, make vascular tissue closed, completely achieve perfect spider vein removal.
2. No scars: 940nm/532nm laser can intelligently identify skin lesions, there isn’t any impact on the normal skin tissue during the whole treatment, its non-invasive physical therapy, there will be no cut on the skin, combines with proper post-long care , will almost no scarring.
3. Fast and easy: only twenty minutes can finish one treatment,
4. Immediate result: After the 940nm/532nm laser treatment, large blood vessels will become smaller lighter, smaller vessels will disappear directly, the treatment effect is very significant.
|Laser Type||GaAlAs Diode Laser|
|Operation Mode||CW, Single Or Repeat Pulse|
|Pulse Duration||10us- 3s|
|Repetition Rate||0.2Hz- 50KHz|
|Pilot Beam||Red Diode Laser Of 650nm, Power<5mW|
|Control Mode||True Color Touch Screen|
|Transmission System||Medical Fibers With SMA905 Connector|